
⚠ Safety Warning
Subject: “Stick” Steering Systems
Models: All Outboard Models Adaptable to Remote Steering Systems
Several years ago, with the increasing popularity of the bass boat, several manufacturers introduced “stick” steering systems. These systems employed a stick type control handle which, when moved fore-and-aft, would steer the boat port or starboard. This system became widely used, especially in the narrow beam boats, due to its space saving mounting at the forward fishing position. The major manufacturers of these systems discontinued marketing them because field results indicated the following disadvantages when compared to standard wheel type systems:
- If the operator should momentarily lose grip on the stick control knob it can quickly flip to one end of its travel. This will cause the boat to veer into a sharp uncontrolled turn.
- Due to the limited arc available for the stick to travel, the steering ratio is very quick which makes accurate control difficult.
- When boating in rough water an operator will tend to hold the steering gear to stay seated. With the long stick for leverage, the steering helm can be broken or torn from its mounting.
- Many stick steering systems will not meet the requirements of the ABYC P-17 Safety Standards because of the increased leverage of the control handle.
- The fore-and-aft motion of the most common stick steering systems is disorienting to the normal boat operator. It’s not customary to push forward to turn to starboard, etc., and is not used in other vehicular steering control systems with which our customers have become accustomed.
Stick steering should not be used with any outboard motor unless the steering system has been designed to eliminate the problem areas stated above.
CR 81-31