A 1982 OMC remote-control bulletin describing installation of a fast idle lever latch.
OMC Outboard Service Bulletin
Remote Control
No. 2056
November, 1982
Subject:Fast Idle Lever Latch
Models:CT Outboards Shipped with Remote Control Assemblies

During the CT model production, a fast idle lever latch will be added to the remote control assembly packed with the motors. The latch feature will hold the fast idle lever in the “run” position. Lifting upward on the latch tab releases the latch so that the fast idle lever can be raised.

This feature may be easily added to earlier model remote control assemblies. In most cases, installation can be done on a control assembly already installed in a boat. A kit, P/N 394079, includes the parts needed to add the latch feature and instructions for installation. Order the kit from your OMC Parts Distributor.

If the modification is required to hold the fast idle lever in the “run” position on a CN or early CT model, list the model and serial number of the motor, the kit P/N 394079 and cost and 1/2 hour labor on a warranty claim. Submit the claim to the OMC Warranty Department. More than one motor may be listed on a single claim.

Partial Kit Contents: See 1.

A. 329358 - Clip LatchC. 329361 - Screws (2)B. 329359 - Filler RodD. 329362 - Latch
Factory kit contents A through DFast idle lever latch kit installed

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Universal Marine Control Cable End Connectors

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 394079

Search for original or compatible replacement part 394079

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.