Replacement of the electric push-button starter switch. June 1983.

Models: 1978 to present 9.9/15 HP models
SUBJECT: Electric Starter Switch Replacement
MODELS: 1978 To Present 9.9/15
To service the electric push button starter switch mounted in the steering bracket of 9.9/15 1978 to present models, order the following:
fo] I)
1 = 386457 Electric Push Starter Switch 1 - 511532 Large Shrink Tube
ES
1. Disconnect battery leads.
2. Remove electric push starter switch from steering bracket.
(Continued)
Electrical System
No. 2078 June, 1983
3. Carefully cut shrink tube @ from switch and leads ©.
4, Remove shrink tube from switch
and leads ©.
5. Remove and retain screws ©) from terminal leads. Discard old switch.
6. Scrape and clean elastic from ring terminal leads with a knife or scraper.
COB 4004

Models: 1978 to present 9.9/15 HP models
7. Secure ring terminals to new [5] switch.
8. Fill space between switch
terminals with RTV Adhesive P/N 263753 ©), and apply liberal amount to securing ring terminal screws
9. Position shrink tube @ around
front @® of switch.
10. Use a heat gun or heat lamp to shrink tube around switch and leads. Fill end of shrink tube with
RTV Adhesive P/N 263753.
11. Install push starter switch assembly into steering bracket.
12, Reconnect battery leads.
—&COB 4005

Suggested products related to this service bulletin. Verify fit and suitability before ordering.
Marine Dual Battery Switch, Battery Box
Search for these supplies on AmazonSearch for original or compatible replacement part 263753
Click here to search on eBayAffiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.