OMC Service Bulletin 2112

July 1984 bulletin about forward gear bearing housing differences on CR 155 Commercial gearcases.

OMC Outboard Service Bulletin
Gearcase
No. 2112
July, 1984
Factory figure 1Factory figure 2

Subject: Difficulty in Assembling the Pinion

Model: CR 155 Commercial

Problem - Forward gear thrust washer and/or thrust bearing drops into groove of the forward gear bearing housing.

Symptom - Pinion binds with the forward gear.

Cause - CR 155 Commercial models can be manufactured with any one of three different forward gear bearing housings.

1 One does not have a groove A, the second has a groove with a band on it B. These can be assembled in the gearcase without difficulty.

12 The third housing C has a groove D machined where the forward gear thrust washer and thrust bearing are located. When assembling this housing into the gearcase, the thrust bearing and/or thrust washer can slip into the groove. This will cause binding between the pinion and forward gear.

Note Do not reuse a grooved housing when servicing the 155 Commercial gearcase. Order a new forward gear bearing housing and bearing assembly. Refer to the CR 155 Commercial Parts Catalog for the correct part number.

Reimbursement for price of the new housing assembly will be covered on a warranty claim. The grooved bearing housing MUST accompany the warranty claim.

Send the warranty claim and the grooved housing to:

Outboard Marine Corporation
Product Warranty Department
3145 Central Avenue
Waukegan, IL 60085

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Bearing Race

Search for these supplies on Amazon

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.