OMC Service Bulletin No. 2117: Trim Sending Units

OMC Service Bulletin No. 2117 (July 1984) addresses trim sending units. It applies to Johnson® and Evinrude® Outboards, OMC® Stern Drive, OMC Sea Drive®.

OMC Outboard Service Bulletin
Midsection

No. 2117
July, 1984

Subject: Trim Sending Units

Models: Johnson® and Evinrude® Outboards, OMC® Stern Drive, OMC Sea Drive®

Problem: Damaged or faulty trim sending unit

Symptom: Inoperative or inaccurate trim gauge reading

Cause: Connecting B+ voltage (12 volts) direct to the sending unit will cause damage. Two ways to damage a sending unit are:

  • improper wiring to the instruments
  • momentary voltage through a tool

Solution: Remove the trim sending unit and test with an ohmmeter, as described in the service manual. If the sending unit fails this test, replace the assembly insuring that the trim gauge wiring has been inspected for proper connection and adjustment.