This October, 1984 bulletin addresses maximum recommended rpm for engine warm-up for all Evinrude and Johnson outboards using remote controls.

Subject: Maximum Recommended RPM for Engine Warm-Up
Models: All Evinrude and Johnson Outboards Using Remote Controls
Cause: Running at excessive RPM during engine warm-up may cause engine failures.
Solution: When demonstrating engine operation to a customer, emphasize the proper starting and warm-up procedure as described in the owner’s/operator’s manual, “After starting, reduce throttle (if necessary to avoid excessive high speed idle) by moving fast idle lever toward RUN position.”
Standard Control - Do not warm up engine with fast idle lever in “START” position as excessive engine speed may damage engine.
Accessory Control - Do not warm up engine with control handle out and in full-throttle position. Excessive engine speed may damage engine.
The maximum recommended starting speed is 4000 rpm. We recommend that the engine speed be reduced to 1000 to 1500 rpm for warm-up period.
Most models are equipped with a pressure relief valve(s) that opens at engine speed above 2000 rpm. If the engine is operated at excessive rpm in neutral the thermostatic control is bypassed, not allowing powerhead to warm up.