OMC Service Bulletin No. 2139: Idling Characteristics of CR 65 Commercial Models

Factory guidance for idle speed adjustment on CR 65 Commercial models, including remote-control installations.

OMC Outboard Service Bulletin
No. 2139 | February 1985 | Page 1 of 1

Idling Characteristics of CR 65 Commercial Models

Idling Characteristics of CR 65 Commercial Models

CR 65 Commercial models have a fixed spark advance. The fixed spark advance feature
allows easier throttle operation on tiller models, improved low speed fuel economy, and
improved engine performance.

Due to fixed spark advance, CR 65 Commercial Models may experience a varying and/or
higher idle speed in neutral than CR 70/75 Models. This is normal. DO NOT make any idle
adjustments while the motor is in neutral.

The idle adjustment must be made when the boat is in the water with the propeller
installed and the motor in forward gear (underway and not tied to dock). Recommended
idle speed in forward gear is 750+ 50 RPM. Have someone operate the boat while idle
adjustment is made.

Before making idle adjustment, obtain an OMC Commercial Service Manual, P/N 507450.
Refer to Engine Synchronization and Adjustments — Section 1 for adjustment procedure.

Remote Models:

If idle adjustment is made, the remote control throttle cable must be readjusted at the
engine to allow for any change in the throttle lever position. Refer to Remote Control -
Section 9 of the above service manual for proper throttle cable adjustment and proper
remote control operation.

CR 84-116

Related marine products

eBay: OMC / Evinrude part 507450

Listings matching the part number

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.