OMC Service Bulletin 2155 explains engine modifications for operating certain Johnson and Evinrude outboards on 86 AKI lead-free gasoline, including application and spark timing charts.
OMC Outboard Service Bulletin
Powerhead
No. 2155
October, 1986
Subject:Engine Modifications for 86 AKI Octane Lead-Free GasolineModels:1970 thru CO, 60 thru 2.6 XP/GT

Some Johnson® and Evinrude® 60 thru 2.6 XP/GT™ models, as originally manufactured, required leaded regular gasoline of a specified minimum octane rating.

NoteIf some of these Johnson and Evinrude models are operated on lead-free 86 AKI (Antiknock Index) gasoline, without being modified, extensive powerhead damage may occur.

Johnson and Evinrude models will operate, or may be modified to operate, on unleaded gasoline. Included in this bulletin is a scaled down outboard portion of Wall Chart CR85-54. The chart lists the models requiring modification, the modification kit part numbers, and part numbers of individual, low compression, cylinder head gaskets.

The modification kits contain installation instructions and a decal to identify the motor has been modified for 86 AKI lead-free gasoline.

NoteThe 86 AKI timing specifications are for original powerheads only. For replacement powerheads, refer to instructions provided with the powerhead.

In most cases, there will be a slight power loss after the engine has been modified to operate on 86 AKI gasoline. If necessary to maintain good acceleration onto plane, reprop the motor to run in the upper end of the full throttle operating range.

NoteIf the full throttle RPM drops below the recommended operating range with normal boat load, install a lower pitch propeller to prevent powerhead damage.

Encourage your customers to use good quality gasoline that does not contain alcohol. Gasoline/alcohol blends can attract water and form corrosive materials that attack fuel tanks. Alcohol may also cause deterioration of nonmetallic fuel lines. Caution customers to have the boat’s fuel lines and fuel system components inspected regularly for signs of deterioration.

NoteDo not use gasoline containing methanol (methyl alcohol). Methanol is more corrosive than ethanol (ethyl alcohol) and could cause permanent damage to fuel system components.

CR85-55
Original OMC bulletin No. 2155 chart page 2
Original OMC bulletin No. 2155 chart page 3

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Inductive Ignition Timing Light

Search for these supplies on Amazon

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.