OMC Service Bulletin No. 2159 Rev. 1 addresses spark advance timing adjustments for 88 aki gasoline.
OMC Outboard Service Bulletin
Ignition SystemNo. 2159 Rev. 1
October, 1986
Subject:Retard Spark Advance for 88 AKI Minimum Gasoline
Models:3 Cylinder thru V6, 1970 thru CO Models Listed
Models Requiring Modification
ModelModel YearsModelModel Years
601970 - 71150 (except XP/GT models)1978 - CO
651972 - 731751977 - CO
751975 - 78185CT - CO
115CO only2001976 - CT
1251971 - 722351978 - CO
1351973 - 762.6 XP/GTCT - CO
1401977 - CR

The United States Environmental Protection Agency has enacted federal regulations effective January 1, 1986, to reduce the permissible level of lead (tetraethyl lead) in regular gasoline from 1.1 to 0.1 grams per gallon.

If the owner uses a pump posted 91 AKI (Anti Knock Index) or higher gasoline, no modification is necessary. The owner must be cautioned that a minimum of 91 AKI gasoline must be used continuously or engine damage may occur.

OMC Marine Engineering has completed tests using 88 AKI (Anti Knock Index) unleaded gasoline in CO and earlier models. To prevent engine damage, the spark timing must be retarded 4° on all models listed above (except 150 XP/GT models).

Assuming the engine is timed correctly, the adjustment may be made without running the engine as follows:

1. Hold adjustment screw and loosen locknut.

2. To retard the timing 4°, use a screwdriver to turn adjustment screw clockwise as follows:

3. Hold adjustment screw and tighten the locknut securely.

4. Install an 88 AKI decal near the fuel connector. (All dealers will be sent decals at no charge from OMC Service.) For additional decals, call 312-689-5630.

Note Advise the owner that a minimum of 88 octane gasoline must be used, or permanent powerhead damage may occur and will not be warrantable.

If the owner wishes to use 86 AKI fuel, refer to wall chart “Engine Modifications for 86 Octane Lead-Free Gasoline” for any additional modifications required.