OMC bulletin 2169 explains precautions for checking outboard power steering fluid levels.

OMC Outboard Service Bulletin
Steering
No. 2169
July, 1986
Subject:Power Steering Fluid Level Check
Models:All Power Steering Equipped Outboards

New motors should be run at least one minute before checking power steering fluid level. Motors are shipped upside down which causes the pump reservoir air chamber to fill with oil. When the motor is turned upright for installation, the air in the system can be trapped in local high pockets and not return to the pump reservoir. When the motor is run, the normal fluid flow will return the air to the pump reservoir.

⚠ Wear safety glasses when checking fluid on new motor. If the power steering fill cap is removed before motor is run, pressure in the system can cause the reservoir to overflow and spray fluid on the motor and technician.

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Marine Boat Steering Cable Grease

Search for these supplies on Amazon

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.