October 1986 guidance for operating loop-scavenged V4 through V8 outboards with the air silencer cover removed.

The air silencer is an integral part of the carburetor calibration. Altering the air silencer, or removing the cover or baffle, will cause a lean fuel mixture at full throttle.
NoteOperating the engine on a lean fuel mixture can cause powerhead damage.
When servicing the engine on a boat or in a test tank, it is permissible to operate all Loop-V models with the air silencer cover removed while checking fuel delivery, etc. Operating engine with the air silencer cover removed may require use of the primer to plane the boat. Do not operate engine at full throttle for periods of longer than 30 seconds when the air silencer cover is removed. Also be aware that sudden deceleration can cause engine to run lean which may lead to sudden engine shutdown.
⚠ Safety Warning: The engine cover is a machinery guard. To prevent contact with rotating parts, always stop engine before making adjustments.
Expect a loss of approximately 500 RPM at full throttle due to lean fuel mixture. Activating the primer will overcome the loss of engine RPM; however, do not operate the primer for more than a total of 60 seconds during any five minute period.
NoteContinuous operation of the primer can cause permanent damage to the primer solenoid.
Suggested products related to this service bulletin. Verify fit and suitability before ordering.
Marine Carburetor Cleaner Spray, Jet Cleaning Wires
Search for these supplies on AmazonAffiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.