OMC Service Bulletin No. 2183: OMC Clip Assembly P/N 431808

December 1986 ignition-system bulletin describing OMC Clip Assembly 431808 and steering-handle emergency ignition cut-off switches.

OMC Outboard Service Bulletin
Ignition SystemNo. 2183December, 1986
Subject:OMC Clip Assembly, P/N 431808
Models:All CU and Later with Steering Handle Mounted Emergency Ignition Cut-Off Switch

1 2 Owners of the models listed above who use their motors in certain applications, such as, auxiliary power on cruising sailboats or as a trolling motor on large fishing rigs, have expressed their desire to disable the emergency ignition cut-off switch feature. These owners have stated that it provides no benefit in their particular motor application, and may even have disadvantages. For applications such as these, the cut-off switch can be disabled by replacing the clip and lanyard assembly Ⓐ with the OMC Clip Assembly, P/N 431808 Ⓑ, as shown. The clip Ⓑ will disable the cut-off switch while retaining the “PUSH” stop button feature. The cut-off switch feature can be reactivated by replacing the clip Ⓑ with the original clip and lanyard assembly Ⓐ.

Make sure that the customer is aware of the function and benefits of the emergency ignition cut-off switch as described in the Owner’s/Operator’s Manual before it is disabled.

Figure 1 original emergency ignition cut-off clip and lanyardFigure 2 OMC clip assembly
CR87-14

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Universal Boat Kill Switch Lanyard

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 431808

Search for original or compatible replacement part 431808

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.