1 2 Until now, one gasket, P/N 323214, has been used to service all 1976 and later V-6 outboards. A new, thicker gasket, P/N 333658 Ⓐ has been released for all 1976 and later 150 CID models (identified by a flat back exhaust cover Ⓑ). The gasket has a coating which is heat activated and must be assembled dry. To ensure proper sealing, mating surfaces must be clean and free of oil, grease and foreign matter. Refer to service manuals for torque specifications and assembly procedures. Disregard the instruction to use OMC Gasket Sealing Compound.
Note In order to achieve proper sealing and prevent gasket damage, the powerhead mounting screws must be retorqued after engine has reached operating temperature and has been allowed to cool. Assemble front and rear exhaust housing covers after powerhead mounting screws have been retorqued.
3 Due to differences in gasket thicknesses, models identified by a tuned exhaust cover Ⓒ and a “figure-eight” exhaust seal Ⓓ will use GASKET P/N 323214 with OMC Gasket Sealing Compound.
Revise the information in your parts catalogs to reflect this change. Please note that the 1987 150/175 models parts catalog incorrectly shows the new gasket P/N 333658 for use on both the 150 and 175 models. Only the 150 model will use the new gasket while the 175 model (with tuned exhaust cover and “figure-eight” seal) will continue to use gasket P/N 323214.


