March 1987 factory break-in procedures for OMC 40 HP through V8 outboards, including fuel mixture, throttle operation, and VRO oil consumption checks.

Due to closer design tolerances in today's high performance precision outboards, it is extremely important that new motors are operated correctly during the break-in period. If the correct break-in procedures are not followed the engine life could be adversely affected.
Listed below are the correct break-in procedures as outlined in the owner's manual. Be certain that all purchasers of new engines are made aware of the recommended procedure to ensure longevity of the product. A shipping tag listing the break-in procedures is supplied with the engine. After the boat is rigged, attach this tag to the remote control handle.
First Hour - Fast idle for 5-10 minutes, half throttle for rest of hour; change speed every 15 minutes.
Second Hour - 3/4 throttle - occasional burst to full throttle for no more than two minutes; change speed every 15 minutes.
Next Eight Hours - Change speed every 15 minutes. Full throttle bursts may be extended to five minutes each.
Suggested products related to this service bulletin. Verify fit and suitability before ordering.
NMMA TC-W3 2-Stroke Marine Outboard Oil
Search for these supplies on AmazonAffiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.