OMC Service Bulletin No. 2195 (October 1987) addresses missing timer base clamps on specified 70 HP outboards, with affected model and serial number ranges.
OMC Outboard Service Bulletin
Ignition System

No. 2195
October, 1987

Subject:Timer Base Clamp, P/N 314495 and Screw, P/N 328714
Models:
Model Numbers      Serial Numbers
CE70ELCU        C7214296 through C7214335
CE70TLCU        C7214336 through C7214451
CJ70ELCU        C8218764 through C8218797
CJ70TLCU        C8218798 through C8218973

Models listed above may have been assembled without timer base clamps.

This could result in the timer base coming in contact with the flywheel.

There are three clamps, one on the port side Ⓐ and two on the starboard side Ⓑ, as shown. For reference, see 70 Model parts catalog, Page 6, Reference Numbers 1 and 5.

If installation of clamps is required, follow procedures outlined in your service manual. Submit part and labor costs on a standard warranty claim form.

Port-side timer base clamp AStarboard-side timer base clamps B

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Adhesive / Decal Remover Solution

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 314495

Search for original or compatible replacement part 314495

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.