
New shipping carton assemblies for the V4 and V6 loop scavenged motors were scheduled for production by May 1, 1988. The cross scavenged V4 and V6 cartons will go into production soon thereafter. The outer carton is a two-piece corrugated box with wood supports glued and stapled to the inside. These supports locate in slots on a wood frame to provide continuous support for the entire length of the box. The wood frame provides support for fork truck handling.
Procedure for Unpacking Motor
The motor may be lifted out of the carton with the powerhead either up or down. The motor is shipped with the powerhead in the down position.
1Cut through the upper carton at the top of the lower carton.
2Remove upper carton and all components inside.
3Cut through the lower carton at the score line of the glue flange just below the staples.
4Install either lifting strap or lifting eye and remove motor from carton.
It is recommended that the dealer remove the staples, carefully break the glue bonds and save at least one V6 lower carton and at least one extra long V4 or V6 upper carton, plus the inner packing. The pack or packs may then be broken down and stored for reuse. The center joint may be reglued and stapled or nailed to the motor frame.



