OMC Service Bulletin No. 2210: Gearcases With Low Oil Levels

OMC advised dealers to check gearcase lubricant levels on CE 40, 48 and 50 outboards before operation.

OMC Outboard Service Bulletin
Gearcase
No. 2210
August, 1988
Subject:Gearcases With Low Oil Levels
Models:All CE 40, 48 and 50

These outboards may have gearcase oil levels that are roughly 3.5 fl. oz. too low. Before running any of these outboards, be sure gearcase is completely full of lube. Add OMC Hi-Vis® gearcase lube through the lower (fill) plug while venting through the top plug. To ensure proper air purging and sufficient lube level, fill slowly and be sure outboard is in vertical position.

Note Gearcase must be full of lube before engine is started or bearing failure will result.

WARRANTY PROGRAM:

Dealer will be credited $3.30 for each outboard requiring additional lube to fill gearcase. Warranty Claim submitted must contain model and serial number of outboard serviced and may list more than one engine.

Complete Warranty Claim as follows:

  • Under “GIVE DETAILS OF FAILURE,” write “Add oil per SERVICE BULLETIN NO. 2210.”
  • Leave “PART THAT CAUSED FAILURE” blank.
  • Use number 09330 for “PART USED FOR REPAIR.”

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

NMMA TC-W3 2-Stroke Marine Outboard Oil

Search for these supplies on Amazon

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.