OMC Service Bulletin No. 2211: Fuel/Oil Mixture Requirements

OMC outlined recommended fuel-to-oil mixtures and operating restrictions for recreational outboards through 50 HP.

OMC Outboard Service Bulletin
Fuel System
No. 2211
September, 1988
Subject:Fuel/Oil Mixture Requirements
Models:All Recreational Colt® Junior® thru 50 Evinrude® and Johnson® CE Models

The recommended fuel/oil ratio for recreational motors from Colt® Junior® through 50 models not having VRO® will be 50:1 (2% oil). Use Evinrude® or Johnson® Outboard Lubricant or another lubricant (oil) that is NMMA BIA certified for service TC-W, or TC-W II (Two Cycle-Water Cooled). TC-W II is preferred because it provides a higher level of performance and protection. Look for the certification information on the container label.

A 100:1 fuel/oil ratio is acceptable only after the motor is completely broken in and if the motor is used frequently.

Do not use 100:1 fuel/oil ratio if the motor is used intermittently and the periods of non-use involve storage in areas with significant temperature changes and/or high humidity variations. Internal rusting may result. Do not use 100:1 fuel/oil ratio if the motor is subjected to constant high RPM operation.

AccuMix® and AccuMix R® oil systems have been changed for 1989 to provide a 50:1 fuel/oil ratio. The new fuel/oil ratio is shown on the AccuMix® tank.

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

NMMA TC-W3 2-Stroke Marine Outboard Oil

Search for these supplies on Amazon

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.