January 1990 bulletin distinguishing drain/fill plugs for ES 20, 25 and 30 gearcases stamped with a “9”.
OMC Outboard Service Bulletin
Gearcase

No. 2218
January, 1990

Subject:Drain/Fill PlugsModels:ES 20, 25, and 30 with Gearcases Stamped “9”
Problem:
These engines are correctly equipped with P/N 912625 drain/fill plug and washer. The parts catalog specifies drain/fill plug and O-ring P/N 307551. This is correct for gearcases without “9” stamped near the drain/fill plug.

Important: Use of plug and O-ring P/N 307551 in a gearcase with “9” stamped next to the drain/fill plug can cause drain fill plug to contact internal gearcase components. This can result in water entering the gearcase or loss of gear lubricant.

Solution:
When servicing these motors, inspect the area around the lower drain/fill plug. If “9” IS stamped in this area use drain/fill plug P/N 912625 or washer P/N 311598 when replacing these parts. If “9” IS NOT stamped in this area use drain/fill plug P/N 307551 or O-ring P/N 333572 as specified in the parts catalog.
Gearcases Without “9”Gearcases With “9”
Plug P/N 307551
Use O-ring P/N 333572
Plug P/N 912625
Use Washer P/N 311598
Printed in USACR90-09

Related marine products

eBay: OMC / Evinrude part 912625

Listings matching the part number

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.