OMC Service Bulletin No. 2221 - False Overheat Signal

February 1990 OMC bulletin addressing false overheat warnings and replacement temperature switch P/N 584166.

OMC Outboard Service Bulletin
Powerhead
No. 2221
February, 1990
Subject:
False Overheat Signal
Models:
60 - CE and Newer
65 - CU and Newer
70 - CD and Newer
Problem:
Warning horn signals overheat condition; motor operates in S.L.O.W.™ warning system during operation of motor where water temperature exceeds 70° F (21° C).
Solution:

Inspect the cooling system for proper operation. If OK, suspect the temperature switch - it may be reacting to warmer than usual cylinder head due to inlet water temperature higher than 70° F (21° C).

Replace original equipment temperature switch with NEW switch, P/N 584166, which:

• Responds to a slightly higher cylinder head operating temperature but still provides adequate powerhead cooling

• Allows the engine to operate in warmer water

Identify the switches:

• Original equipment temperature switch has a 5½ in. (140 mm.) tan lead Ⓐ

• NEW temperature switch has a 7¼ in. tan/blue lead Ⓑ

Factory photograph comparing original and replacement temperature switches A and B
CR90-19

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Marine Water Pump Impeller Kit

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 584166

Search for original or compatible replacement part 584166

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.