OMC Service Bulletin No. 2222 - Lifting Eye and Adapter Assembly

February 1990 OMC safety bulletin covering lifting eye P/N 396748 and screw kit P/N 434292.

OMC Outboard Service Bulletin
Service Tools
No. 2222
February, 1990
⚠ Safety Warning
Subject:
OMC Lifting Eye and Adapter Assembly, P/N 396748
Models:
Used on 3-cylinder thru V8 outboards
Problem:
NEW 35 amp flywheel has thicker dome. If you install the Lifting Eye and Adapter Assembly with the 1½ in. screws as previously specified, the screws will not enter the flywheel far enough to lift the motor safely.
Solution:

Screw Kit, P/N 434292, is now available from OMC Parts & Accessories. The screws in this kit are 1¾ in. long. They will supersede the 1½ in. screws as part of the Lifting Eye and Adapter Assembly.

In the future, when attaching the Lifting Eye and Adapter Assembly to:

• 60 thru 115 models, use either the 1⅛ in. or the 1½ in. long screws.

• 120 thru V8 models, use only the 1¾ in. long screws.

⚠ The body of the lifting eye does NOT have to be drawn tight to the flywheel to be used, as was previously recommended. But, the threads of the lifting screws do have to be fully engaged before beginning lift.

This bulletin obsoletes Service Promotion No. 21 of April, 1986

CR 90-24

Related marine products

eBay: OMC / Evinrude part 396748

Listings matching the part number

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.

Related products

Lifting eye screw kits - recommendations coming soon.