OMC Service Bulletin No. 2233 - Fuel Quality

Discusses gasoline quality changes and OMC recommendations for premium fuel and OMC 2+4 fuel conditioner.

OMC Outboard Service Bulletin
Fuel System
No. 2233
September, 1990
Subject:

Fuel Quality

Models:

All

Problem:

The chemical composition of gasoline has changed significantly during the past ten years. Most notably, the level of tetraethyl lead has been reduced to ¹⁄₁₀ gram per gallon or eliminated completely.

During the same period, oxygenates and ethers were added to enhance octane and extend supplies of hydrocarbon gasoline. Also, beneficial components were removed from some gasolines because of blending and economic reasons.

The result of this evolution is that some contemporary gasolines tend to be more chemically reactive than others. These unstable fuels can cause fuel system deterioration, corrosion, and gummy deposits in carburetors.

Solution:

There are two things that you and your customers can do to minimize the negative effects of low grade gasolines.

A. While the recommendations for minimum octane have not changed for 1991, all OMC operator and service literature specifically encourages the use of premium grade fuels. Most national brand premium fuels contain detergent and dispersant ingredients advertised to reduce intake valve and fuel injector deposits. These ingredients can also remove and prevent carbon buildup on pistons and rings. These ingredients can extend engine life while maintaining a high level of engine performance. Other ingredients can reduce chemical reactivity and stabilize the fuel.

B. All OMC operator and service literature encourages the use of OMC 2+4® fuel conditioner, particularly during periods of engine non-use. Gasoline, as purchased at the pump, has a guaranteed shelf life of three months. OMC 2+4® fuel conditioner extends the useful life of fuel in a number of ways. It contains:

  • Metal deactivators - to render brass or copper alloys chemically inactive toward gasoline
  • Anti-oxidants - to slow the chemical breakdown of gasoline
  • Corrosion inhibitors - to help reduce long term corrosion of metal fuel system components
  • Dryers - to absorb and isolate moisture in the fuel system