OMC Service Bulletin No. 2234 - Steering Connector Kits for <em>FasTrak™</em> Midsection

Identifies steering link, dual-cable steering kit, and tie bar requirements for 1991 FasTrak midsections.

OMC Outboard Service Bulletin
Steering
No. 2234
December, 1990
Subject:

Steering Connector Kits for FasTrak™ Midsection

Models:

1991 60 thru 225 TL and TX

Problem:

FasTrak midsection requires different steering link, dual cable steering kit, and tie bars.

Solution:

Use new steering link and tie bars - they can be identified by:

  • bright polished finish
  • part number stamped on component . . .
    P/N 175125   Steering Link for FasTrak
    P/N 175126   Dual Cable Steering Kit for FasTrak
          (Requires P/N 175125 Steering Link)

Tie Bars for FasTrak Models:

  • P/N 175171   18½ to 24½ in. (469,9 to 622,3 mm)
  • P/N 175172   23½ to 30½ in. (596,9 to 774,7 mm)
  • P/N 175173   29½ to 36½ in. (749,3 to 927,1 mm)
  • P/N 175254   36 to 42 in. (914,4 to 1066,8 mm)

Important Failure to use FasTrak-compatible steering components on FasTrak-equipped models will result in restricted steering. FasTrak steering components must only be used on FasTrak midsections.

Note FasTrak steering arms have an additional hole for use with the new tie bars. The illustration shows the correct application for each hole. The cast letters next to the hole identify usage.

Factory diagram showing T, P and D holes in FasTrak steering arm

Ⓓ Steering link for all models without power steering
Ⓟ Steering link for power steering models
Ⓣ Tie bar for dual engine applications

Related marine products

eBay: OMC / Evinrude part 175125

Listings matching the part number

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.