December 1990 OMC service bulletin explaining new propeller shafts and thrust washers for 1991 V6 and V8 gearcases.

OMC Outboard Service Bulletin
Gearcase
No. 2235
December, 1990
New Propeller Shaft
All 1991 with V6 and V8 Size Gearcases
All standard rotation gearcases for these models have a larger diameter propeller shaft, requiring a new propeller thrust washer that is thicker and has a larger bore.

Thrust washers used on 1990 and older models will not fit on the new propeller shaft.

Stock and use the two new propeller thrust washers:

1. P/N 126402 . . .

  • will be shipped with all 1991 standard and counter rotation models that use the V6 or V8 size gearcase
  • can also be used on 1990 and older standard and counter rotation models
  • works with all current OMC propellers except the OMC Shooterâ„¢

2. P/N 126318 . . .

  • fits only OMC Shooter propellers
  • will be shipped with all OMC Shooter propellers
  • can also be used with 1990 and older models

Identify the new propeller thrust washers from the old one by comparing flange sizes. Both new thrust washers have a thicker flange.

OLD and NEW propeller thrust washer profiles

Related marine products

eBay: OMC / Evinrude part 126402

Listings matching the part number

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.