January 1991 OMC bulletin covering filter cap gaskets and O-rings for 1990 outboard models with large fuel pumps.

OMC Outboard Service Bulletin
Fuel System
No. 2236
January, 1991
Fuel Pump Repair Kits
1990 Models with “Large” Fuel Pump
Some fuel pumps were assembled using early-production pump bodies and late-production filter caps. These pumps require a filter cap gasket and two filter cap O-rings to seal properly. Neither repair kit contains enough parts to rebuild these pumps.
These pumps can be identified by:

▣ 1   • a nonremovable fuel outlet nipple Ⓐ
       • one gasket Ⓑ and two O-rings Ⓒ sealing the filter cap

Service these pumps by selecting the fuel pump repair kit in your OMC Parts Catalog for early production models.

In addition, obtain 1 each:

  • P/N 324660 O-ring
  • P/N 319528 O-ring

▣ 2   Install the filter cap gasket Ⓑ BEFORE placing the small O-ring on the pump’s center post.

⚠ Failure to inspect your work could allow fuel leakage to go undetected. This could become a fire or explosion hazard.

Figure 1 fuel pump componentsFigure 2 filter cap gasket

Related marine products

eBay: OMC / Evinrude part 324660

Listings matching the part number

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.