OMC Service Bulletin No. 2237: VRO² Pump Repair Kits

March 1991 OMC bulletin listing VRO² fuel pump repair kits, component contents, and intermediate housing applications.

OMC Outboard Service Bulletin
Fuel System
No. 2237
March, 1991
Subject:VRO² Pump Repair Kits
Models:All VRO² Equipped Models

Repair kits for VRO² pumps are now available. The kits are not listed in part catalogs for 1990 and older models.

Refer to this bulletin for repair kit part numbers, application, and the content of specific kits. Use the procedure outlined in the 1991 Service Manual to troubleshoot and repair the pump.

These kits will repair failures of the “air-motor” and fuel pump portions of the pump. Problems with the oil pump or “No Oil Flow” sender will require replacement of the complete VRO² pump.

Note Do not interchange inlet housing parts or air motor poppet springs from one pump to another.

The inlet housing contains the oil pump and “No Oil Flow” sender. These components are matched during production to insure proper operation. Use of unmatched components may disable the “No Oil Flow” alarm or result in errant “No Oil Flow” alarms.

Installation of an incorrect poppet spring or oil pump piston will change the calibration of the pump. This could result in either over-oiling or a lack of lubrication.

Information about these kits will be provided in the 1991 final edition Accessory Parts Catalog.

(Continued)
Original second page of OMC Bulletin No. 2237, showing VRO pump repair kit illustration, kit contents and Chart A intermediate housing kit applications
Part numbers in the chart: 175240, 175241, 175242, 175248, 124358, 175243, 175244, 175245, 175246, 175247.

Related products

VRO² pump repair kits P/N 175240, 175241, 175242, 175248 and intermediate housing kits 175243 through 175247.