OMC bulletin addressing high-speed orifice changes during break-in for EI 20-inch 200 and 225 outboards.

OMC Outboard Service Bulletin
Fuel System
No. 2241
June, 1991
Subject:
Running Lean During Break-In Period
Models:
“EI” 20 in. 200 and 225
Problem:

We have determined that 20 in. 200 and 225 outboards can benefit from larger high-speed orifices on cylinders No. 5 and 6 during the break-in period.

Solution:

On all “EI” 20 in. 200 and 225 outboards in your inventory, remove the 62D high-speed orifices from the bottom two carburetors (No. 5 and 6). Replace with 65D high-speed orifices, P/N 327541.

● A proper break-in procedure is very important to any high performance engine. See Operator’s Manual for proper procedure. Failure to follow this procedure could result in lower performance, shorter engine life, and could affect the engine warranty.

● It is not necessary to install the 65D high-speed orifices in a motor that is already through its break-in period.

● It is not necessary to change back to the 62D high-speed orifices when the break-in period is completed.

This procedure will be covered by the OMC Warranty. Submit a warranty claim for each motor involved.

● Owner’s Name: Use “Dealer Stock”
● Labor: Use flat rate code “L- 1.2”
● Parts: 2 - P/N 327541 Orifices
● Failing Part: P/N 1331433

Completed claim forms or questions should be directed to your normal OMC Warranty contact:

OMC Service in Waukegan
or
OMC West Service Department
or
Your Evinrude® or Johnson® Distributor

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Marine Carburetor Cleaner Spray, Jet Cleaning Wires

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 327541

Search for original or compatible replacement part 327541

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.