OMC Service Bulletin No. 2248: Jumping Out of Gear

October 1991 OMC gearcase bulletin on jumping out of forward gear and replacement forward gear, pinion and shifter dog parts.

OMC Outboard Service Bulletin
Gearcase
No. 2248
October, 1991
Subject:
Jumping Out of Gear
Models:
“EI” 45RW, 45RS, 55RW, 55RS, 65RS, 60TTL, 70TTL
Problem:

An error in machining some forward gear bushings can allow the bushing-to-propshaft clearance to increase. The additional clearance can allow the gearcase to jump out of forward gear.

The problem usually occurs during acceleration or full-throttle operation. The problem might be mistaken by the operator as hitting an underwater object, a loose shift handle, or as an ignition misfire.

Solution:

Verify that all remote control and shift linkage adjustments are correct before proceeding. If the adjustments are OK and the problem continues, replace the forward gear & pinion set and the shifter dog. Refer to chart for part numbers.

45/556560/70TTL
Forward & Pinion398522397338397338
Shifter Dog318303318303318303

If you replace these parts, identify the engine as being updated by stamping a “G” in the trim tab pocket.

If you replace these parts during the engine's warranty period, complete a warranty claim using the following information:

  • Flat Rate Code: G-11
  • Flat Rate Time: 4.2 Hours
  • Failing Part: 398522 or 397338
CR91-43