OMC Service Bulletin No. 2283 - Flywheels and Spark Advance Screws

Published in August 1994, this OMC bulletin addresses flywheels and spark advance screws for 1994 (ER) Electric Start 20 - 30.

OMC Outboard Service Bulletin
Ignition
No. 2283
August, 1994
Subject:

Flywheels and Spark Advance Screws

Models:

1994 (ER) Electric Start 20 - 30

Problem:

Late in the 1994 production year, a change was made to electric start flywheels to improve their emergency rope start capability.

The upgraded flywheel requires a longer spark advance screw. Reports from the field indicate that engines were built with incorrect combinations of flywheels and screws.

Mismatched flywheels and spark advance screws can damage the motor cover or cause engine performance problems.

Solution:

1 Early production flywheels (P/N 584373) can be identified by the ignition timing figures cast on the ring gear. This flywheel must use spark advance screw P/N 335762, which is 2 in. (5 cm) long.

2 Late production flywheels (P/N 585158) can be identified by the ignition timing figures cast on the rim of the flywheel. This flywheel must use spark advance screw P/N 334218, which is 2.375 in. (6 cm) long.

As these engines come in for routine service, check the combination of flywheel and spark advance screw.

Factory figure 1Factory figure 2

Related marine products

eBay: OMC / Evinrude part 584373

Listings matching the part number

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.