OMC Service Bulletin No. 2288, issued December, 1994, covers new service tools for 40–300. This archive preserves the factory bulletin in searchable text.

Service tools referenced: 334455, 341438, 342216, 507074.

OMC Outboard Service Bulletin
Service Tools
No. 2288
December, 1994
Subject:New Service ToolsModels:40–300

These two outboard service tools have been developed during the past year and are not included in the 1995 Outboard Essential Service Tool Kit, P/N 507074. These tools are available from OMC SysteMatched™ Parts and Accessories.

1 Pinion Nut Starting Tool, P/N 342216, is a double-ended tool to start the pinion nut on the driveshaft. One end is used for the 40, 48, and 50 models, and the other end is used on V4 thru V8 models.

2 Wrench Retainer, P/N 341438, is used to retain Pinion Nut Wrench, P/N 334455, to the propeller shaft when removing and installing the pinion nut on V4 thru V8 models.

Figure 1: pinion nut starting toolFigure 2: wrench retainer on propeller shaft
CR94-37

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Marine Lower Unit Gear Oil Pump

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 507074

Search for original or compatible replacement part 507074

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.