OMC Service Bulletin No. 2291: Defective Neutral Warm-up

This March 1995 bulletin describes a neutral warm-up mechanism defect in concealed side-mount accessory controls 175495 and 175497.

OMC Outboard Service Bulletin
Remote Control
No. 2291
March, 1995
Subject:
Defective Neutral Warm-up
Models:
Accessory Controls, P/N 175495 & 175497
Problem:
Factory illustration of neutral warm-up control with knob A

A small number of accessory, concealed side-mount controls assembled during the last 18 months could have a functional problem. The neutral warm-up knob Ⓐ can be engaged when the control handle is in FORWARD or REVERSE. Since the neutral warm-up knob disengages the shift mechanism, this defect can cause two functional problems:

1. If the control handle is returned to the NEUTRAL position after the neutral warm-up knob has been engaged, the engine will not restart.

2. Under some circumstances, the shift mechanism might remain disengaged. The control handle will no longer reflect correct gear selection and the operator will become confused.

Solution:

Verify the correct operation of any accessory, concealed side-mount control that is less than two years old. As your customers’ boats come in for routine service, verify that the neutral warm-up knob CANNOT be engaged in FORWARD or REVERSE.

If you have any of these controls in stock, verify correct neutral warm-up operation on any units that have a date code ending in “/S” or “/T”. “9JT” is an example of an OMC accessory date code.

OMC will replace any control with this functional problem. Return the control and a claim to the OMC Warranty Department in Waukegan, Illinois.

Related marine products

eBay: OMC / Evinrude part 175495

Listings matching the part number

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.