OMC Service Bulletin No. 2294 - Transporting and Storing

July 1995 OMC bulletin on transporting and storing 9.9 and 15 HP four-stroke outboard engines.

OMC Outboard Service Bulletin
Shop Information
No. 2294
July, 1995
Subject:
Transporting and Storing
Models:
4-Stroke 9.9 and 15
Problem:

1 If you lay the engine down, reservoir oil Ⓐ will flow into the valve cover vent cavity Ⓑ.

2 If the engine is stored on its starboard side, oil can leak out the vent hose Ⓒ at the carburetor.

2 If the engine is started before the valve cover drains, oil could be forced out the vent hose Ⓒ.

Solution:

Review the following information with your customers:

3 To transport the engine, rest it on its port side, on a padded surface.

If you stored or transported the engine horizontally, mount it on a transom, and wait at least ten minutes before starting.

Note Check crankcase oil level at regular intervals. An oil level that is too low or too high will cause engine damage.

Note Always avoid transporting or storing engine with gearcase higher than powerhead. Water or oil could leak into the cylinders.

Original factory figure 1Original factory figure 2Original factory figure 3