OMC Service Bulletin No. 2301 Rev. 1 - Missing Drain Holes

Issued in February 1996, this powerhead bulletin identifies missing lower engine cover water drain holes on certain 1996 (ED) 20 through 30 HP outboards. It gives inspection, drilling, and warranty claim instructions.

OMC Outboard Service Bulletin factory header
Powerhead
No. 2301 Rev. 1
February, 1996
Subject:
Missing Drain Holes
Models:
1996 (ED) 20 thru 30
Problem:
1The lower engine cover could be missing one, two, or all three of the water drain holes. This could accelerate corrosion within the engine compartment and in extreme cases allow water into the engine.
Solution:
1996 (ED) 20 thru 30 outboards with serial numbers 4031601 to 4054300 are affected. Inspect any outboards you have in stock and that come in for routine service.

If any or all three water drain holes are missing, add them using a ⁵⁄₃₂ in. (3,9 mm) diameter drill.

If the lower engine cover requires drilling of any or all three water drain holes, submit a warranty claim to the OMC Warranty Department. Use the following information on the warranty claim:

  • Flat Rate Code: MC-99
  • Flat Rate Time: 0.5 Hour
  • Failing Part: 9999911
Figure 1, lower engine cover with arrows identifying three drain hole locations

Related products

Repair supplies for lower engine cover drain holes - recommendations coming soon.