
The design of our key switch changed for the 1996 model year. The new switch combines the engine start and emergency stop functions. The new switch has certain features that are affected by installation and operation style.
We have received a number of good switches back under warranty because they were installed or used improperly.
1 The new key/emergency stop switch has a spring-loaded key cylinder A that must be fully depressed and flush with the switch body to take advantage of all switch functions. A correct and safe installation can be achieved two ways:
2 ⚠ The switch can be installed in a dashboard using an OMC bezel B, spacer C, and captive nut D. The captive nut depresses the spring-loaded key cylinder and disables the emergency stop feature. An auxiliary emergency stop switch should be used with this installation.
3 The switch can be installed in a dashboard, flush bezel, or OMC control using a conventional hex nut E. The emergency stop clip F depresses the spring-loaded key cylinder in this installation.
⚠ The combination key/emergency stop switch is designed to function normally and protect the operator when the spring-loaded key cylinder is fully depressed. If the key cylinder is not depressed by the installation or emergency stop clip, the engine might shut off unexpectedly while priming or might not shut off during an emergency.


