OMC Service Bulletin No. 2310: Seal Installation

February 1997 gearcase bulletin describing installation of rubber-coated metal case seals using OMC DPL Penetrating Lubricant.

OMC Technical Service Outboard Bulletin
ROUTE TO:   □ SERVICE MANAGER   □ SERVICE WRITER   □ TECHNICIAN 1   □ TECHNICIAN 2   □ TECHNICIAN 3   □ FILE
Gearcase
No. 2310
February, 1997
Subject:Seal Installation
Models:All
Problem:Rubber-coated metal case seals are being used in many current and non-current applications. These seals require a different installation procedure. Failure to use this installation procedure could allow internal gearcase pressures to force the seal out of position and cause the gearcase to leak.
Solution:

1Spray the rubber-coated outside case Ⓐ with OMC DPL Penetrating Lubricant prior to installation. This aids in the installation, then evaporates allowing the seal’s rubber case to bond to the aluminum housing. Use this procedure for all rubber-coated seal applications.

Factory figure 1

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

NMMA TC-W3 2-Stroke Marine Outboard Oil

Search for these supplies on Amazon

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.