OMC Service Bulletin No. 2312 - Buzzing Sound

March 1997 OMC service bulletin describing a rear motor-cover latch adjustment for 8/9.9 (211cc) four-stroke outboards.

OMC Technical Service Outboard Bulletin
ROUTE TO:□ SERVICE MANAGER□ SERVICE WRITER□ TECHNICIAN 1□ TECHNICIAN 2□ TECHNICIAN 3□ FILE
Shop Information

No. 2312
March, 1997

Subject:
Buzzing Sound
Models:
All 8/9.9 (211cc) Four-Stroke
Problem:
When revving the engine in NEUTRAL or operating it above 2500 RPM, the engine develops a “buzzing” sound. The sound is caused by a loss of tension in the rear motor cover latch.
Solution:
Readjust the rear motor cover latch as follows:

1 1. Loosen both rear motor cover latch nuts Ⓐ approximately one turn.

2 2. Adjust hook Ⓑ so the top of the hook is 0.040 in. (1,0 mm) above latch bracket Ⓒ.

3. Tighten the latch nuts to a torque of 89-106 in. lbs. (10-12 N·m).

4. Install the motor cover and check for proper latch operation.

Factory illustration 1Factory illustration 2
CR97-28

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

12V Marine Boat Warning Buzzer / Piezo Alarm Horn

Search for these supplies on Amazon

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.