OMC Service Bulletin No. 2321: Replacement Powerheads

November 1997 bulletin on high-speed carburetor jet changes when installing replacement 200/225 HP powerheads on 1994 (ERS) and newer outboards.

OMC Technical Service Bulletin
ROUTE TO: □ SERVICE MANAGER  □ SERVICE WRITER  □ TECHNICIAN 1  □ TECHNICIAN 2  □ TECHNICIAN 3  □ FILE
Powerhead
No. 2321
November, 1997
Subject:Replacement Powerheads
Models:1994 (ERS) and Newer 200/225
Problem:Certain carburetor assemblies require a high-speed jet change to ensure adequate fuel delivery when a replacement 200/225 powerhead is installed.
Solution:
1 2 Refer to tag Ⓐ on the carburetor cover plate for carburetor assembly part number. Change the high-speed jet Ⓑ on the following carburetor part numbers:

200 Models - P/Ns 436550/436551 and 438512/438566 - change high-speed jet to 69D, P/N 327558.

200 Limited Edition, 225 - P/Ns 437653/437654 and 438514/438568 - change high-speed jet to 74D, P/N 333669.

Note 2 Be sure original or replacement high-speed jets Ⓑ are properly tightened before you install the carburetor assemblies.

Note Be sure to read the instruction sheet supplied with the replacement powerhead for additional changes in service procedures.

Figure 1: carburetor cover tag AFigure 2: high-speed jet B

Related marine products

eBay: OMC / Evinrude part 327558

Listings matching the part number

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.