OMC Service Bulletin No. 2322 - Driveshaft Shimming

December 1997 service tool update for driveshaft shimming on 1996 and newer 45/55 and 50 through 70 HP three-cylinder outboards.

Service tools referenced: 328363, 393185.

OMC Technical Service Outboard Bulletin
ROUTE TO:   □ SERVICE MANAGER   □ SERVICE WRITER   □ TECHNICIAN 1   □ TECHNICIAN 2   □ TECHNICIAN 3   □ FILE
Service Tools
No. 2322
December, 1997
Subject:
Driveshaft Shimming
Models:
1996 (ED) and newer 45/55, 50 thru 70 3-cylinder
Problem:
Chamfer collar drawing showing diameter A and depth B

These models use a driveshaft bearing housing with an extended lip seal. The extended lip seal protrudes outside of the housing which makes the seal susceptible to damage during driveshaft shimming procedures.

An original Collar, P/N 328363, could damage the seal lip during the shimming operation.

The extended lip seal driveshaft bearing housing is also used for service.

Solution:

1To provide clearance for the driveshaft seal, chamfer collar hole to a diameter of 1 in. (25,4 mm) Ⓐ and to a depth of 0.125 in. (3,2 mm) Ⓑ. This modification will not affect the use of the collar in any application.

If you do not have the capabilities to update your tool, order a new Collar, P/N 328363, from OMC® Genuine Parts. All collars in stock are updated. All OMC Driveshaft Shimming Tool Kits, P/N 393185, include the updated collar.

CR98-04

Related marine products

eBay: OMC / Evinrude part 328363

Listings matching the part number

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.