ROUTE TO: □ SERVICE MANAGER □ SERVICE WRITER □ TECHNICIAN 1 □ TECHNICIAN 2 □ TECHNICIAN 3 □ FILE
Subject:
Remote Control Cable Retainer
Models:
1999 (EE) 40/50 4-Stroke
Problem:
1 Some control cable retainers were improperly manufactured and can come loose. If a retainer comes loose, it could cause hard shifting or high idle speeds. A bad retainer can be identified by three notched corners instead of four. These retainers were shipped with 1999 (EE) 40/50 4-Stroke outboards with serial numbers between:
E40PL4EE - 17000008 thru 17000187
E50PL4EE - 18000014 thru 18000203
Solution:
All 40/50 4-Stroke outboards that have serial numbers in the above ranges
MUST have their retainers inspected. The retainer must be replaced if it has three notched corners.
- If the outboard is in your inventory, this inspection/repair should be done immediately.
- If the outboard has been sold, but is not registered with us, please notify the owner. Advise the owner to arrange for an inspection as soon as possible.
- If the outboard was sold, and is registered with us, we have instructed the owner to schedule an inspection as soon as possible.
2 For each outboard you inspect that needs repair, order a new Retainer, P/N 5031593, from
OMC Genuine Parts. Install the new retainer following the instructions. Submit a complete OMC warranty claim that includes the following information:
- Group Code: R
- Failing P/N: 9999925
- Flat Rate Time: 0.5
- Flat Rate Code: TS-99
- Customer Comment Code: 223

