OMC Service Bulletin No. 2354 - False ECU Code 23 and/or 24

March 2000 bulletin describing false ECU fault codes and diagnostic software correction.

OMC Technical Service Outboard Bulletin
ROUTE TO:  □ SERVICE MANAGER  □ SERVICE WRITER  □ TECHNICIAN 1  □ TECHNICIAN 2  □ TECHNICIAN 3  □ FILE
Electrical System
No. 2354
March, 2000
Subject:
False ECU Code 23 and/or 24
Models:
90/115 FFI 1998 (EC)
90/115 FFI 1999 (EE) suffix C and N
150/175 FFI 1999 (EE) suffix A, C, N and S
200/225 FFI 1999 (EE) suffix N, O and S
Problem:
Some ECU’s used on the above models store a false fault code 23 and/or 24 (ECU temperature below expected range) and activate the “Check Engine” light. This will also give a reading of 65,521 degrees on the Diagnostic Monitor Screen.
Cause:
A malfunctioning redundant monitoring circuit in the ECU that will not affect engine operation.
Solution:
There is new software to correct this false code. If this problem is experienced, contact the OMC Technical Service Department for procedures to get new software installed. Although the false fault code will be eliminated, the reading of 65,521 degrees will still be seen on the Diagnostic Monitor Screen. Ignore this reading.

Note This bulletin affects the models listed only if they have not had the injector retainer kit installed.

Note On 150/175 FFI™ models, 1999 (EE) with suffix O and 2000 (SS) with suffix V, with enhancement kit installed, the above solution applies.

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Marine Outboard Service Tool Kit / Shop Towels

Search for these supplies on Amazon

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.