OMC Service Bulletin No. 2361: 40, 50, 70 4-Stroke Tiller Handles

March 2000 OMC bulletin on updated tiller handle kits for 1999 and 2000 four-stroke outboards, including upgrade kit P/N 5032251.

OMC Technical Service Outboard Bulletin
ROUTE TO: SERVICE MANAGERSERVICE WRITERTECHNICIAN 1TECHNICIAN 2TECHNICIAN 3FILE
SteeringNo. 2361
March, 2000
Subject:
40,50,70  4-Stroke Tiller Handles
Models:
1999(EE) and 2000(SS)
Problem:
The tiller handle has been recently redesigned and is available for all of the above listed models. The redesigned handle has been reinforced, and features a mechanical system that ensures that the operator closes the throttle before changing gear position.
Solution:
If you have purchased and installed a tiller handle kit for any of the above models prior to October 1, 1999, you should contact the customer to have his tiller handle updated. If you have any older kits in stock, they are to be upgraded prior to sale. The original handle can be easily identified by the lack of a spare emergency lanyard clip holder on the port side of the handle, approximately 1½” in front of the tiller handle pivot. Upgrade kit, P/N 5032251 for older tiller handles. This kit can only be ordered through the OMC Technical Service Department. The part numbers for the latest Tiller Handle kits are as follows:
P/N 5032253 – 1999/2000 40/50

P/N 5032254 – 1998/2000 70

Note OMC will cover labor and material only if the engine is under warranty. You can submit warranty using OMNI or a standard Warranty Allowance Request. Use the following information:

  • Failing P/N: 9999932
  • Flat Rate Time: 1.0 HR.
  • Flat Rate Code: TH-99

Related marine products

eBay: OMC / Evinrude part 5032251

Listings matching the part number

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.