August 2000 revised bulletin identifying compensated and non-compensated 1999 FFI fuel injectors and service kits.

During the 1999 model year the Ficht ECU was given the increased capability to recognize production variations among fuel injectors. The result is optimum fuel delivery to each cylinder based on the flow characteristics of each cylinder’s fuel injector.
Each fuel injector’s serial number and flow characteristics are loaded into the ECU during production. This means that there is a unique relationship between the engine’s ECU and fuel injectors.
Earlier model 1999 engines were built with fuel injectors that do not use fuel flow compensation, while later models were built with fuel injectors that do have fuel flow capabilities as described above.
When servicing fuel injectors on 1999 model FFI engines, you must identify which model (compensated or non-compensated) you have before ordering the part.
Use the following information for proper identification.
ID Method #1


ID Method #2
Use OMC FFI Diagnostic Software Version 1.41. (See sample menus below)
From the “Program Select Menu” select #2 - “Service Utilities”.
From the “Service Utilities Menu” select #2 - “Injector Info”.

1999 FFI Fuel Injector Service Kits
| Models | Non-compensated | Compensated |
|---|---|---|
| 90/115 all except “N” suffix | 5004477 | |
| 90/115 “N” suffix only | 5004478 * | |
| 150/175 all except “O” & “N” | 5004477 | |
| 150/175 “O” & “N” suffix only | 5004479 * | |
| 200/225 “S” suffix only | 5004473 - port 5004474 - stbd | |
| 200/225 “N”, “O” suffix | 5004475 - port * 5004476 - stbd * |
* Install software provided with kit.
For all models other than 1999, refer to the appropriate OMC parts catalog for service injector part numbers.
FFI fuel injector service kits - recommendations coming soon.