OMC Service Bulletin No. 2379: Water Intrusion Through Motor Cover

This August 2000 bulletin addresses water draining through motor-cover baffle holes onto electrical connections.

OMC Technical Service Bulletin
Electrical
No. 2379
August, 2000
Subject:
Water Intrusion Through Motor Cover
Models:
All 2000 (SS) Evinrude 200/225 Ficht RAM Injection®, Early 2001 (SI) Johnson 60° & 90° V4 & V6
Problem:
1 The inner baffles of the upper motor cover have two .25-inch diameter holes for drainage of excess water. If the engine is tilted up and is turned to either side, these holes allow water to drain onto electrical connections on the powerhead.
Solution:
2 Plug the two holes with RTV Silicone Sealant, or any approved marine silicone sealant.
Factory illustration 1Factory illustration 2

Related marine products

Amazon: Marine sealant

Related marine supplies

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.