Johnson Service Bulletin SB-879 - Rubber Spaghetti Seals

December 13, 1961. Johnson changed the servicing of individual gearcase rubber seals to a 50-foot roll, part 309044, and referred dealers to SB-845 for cutting instructions.

Johnson Motors Service Bulletin letterhead
December 13, 1961
Bulletin No. SB-879 Gearcases
SUBJECT: Change in Servicing Rubber "Spaghetti" Seals.
Rubber "spaghetti" seals 302513, 302604, 302622, 305118 and 305150 will no longer be serviced when Parts Distributors' present stock of these seals is depleted. They will be replaced by 309044 - rubber seal - 50' roll - list price $3.00, subject to your regular parts discount.
All individual seals will now be cut to the correct length from 309044. It is suggested that $.10 be charged for each cut piece. Over 30 average length seals can be cut from 309044.
Until your Parts Distributors' stock of the individual seals is depleted, you may order either 309044 or the quantity of individual seals you require. If you order a quantity of individual seals and the distributor's stock of these seals is already depleted, the distributor will substitute a roll or rolls of 309044 as shown by the following examples: An order for a total of 20 individual seals will probably be replaced by one 309044 - Seal - 50' roll. An order for a total of 95 individual seals may be replaced by three 309044 - Seal - 50' roll. In the event you do not order a quantity of seals as described above, but order only one seal such as 302622, and the distributor's stock of this seal is depleted, you normally will receive one roll of 309044. Keep in mind the various ways in which you will receive 309044 during the stock depletion period, and order accordingly.
Since the individual seal is no longer serviced and the cost per cut piece is so low, it will no longer be a warranty replacement item. Gearcase seals will in- stead be considered expendable just as gaskets, assembly grease, gasket cement, etc.
The 1962 Parts Catalogs will show the individual seal with a reference or item number as usual. However, the phrase "Cut from 309044" will be shown following the corresponding part number.
The Master Parts Price List will show: 309044 - Rubber Seal - 50' Roll - $3.00.
As a reminder, refer to Service Bulletin SB-845 which shows the proper method for cutting these seals to the correct length.
JOHNSON MOTORS W. W. DeWees Service Department
WWD:eb NOTE: Post on your Miscellaneous index.