Back to 1970s OMC bulletins

Evinrude Ignition Bulletin #1020 - Suppressor Removal with Phase II Pulse Pack

August 1973 factory guidance for 1967-1968 100 HP outboards: remove voltage suppressor P/N 580732 only when replacing the original pulse pack with the Phase II unit, and install the replacement rotor supplied with the new pack.

Original 1973 Evinrude service department artworkOriginal 1973 Service Bulletin artwork
IGNITION #1020
August, 1973
SUPPRESSOR REMOVAL WITH PHASE II PULSE PACK
MODELS 100782, 100783, 100882 AND 100883
Outboard Marine Engineering has advised that when replacing the original

pulse pack on 1967 - 1968 100 HP models with the new Phase II pulse pack

remove the voltage suppressor part #580732 at the time the Phase II pack

is installed. The original rotor must be replaced with the new style rotor

supplied with the Phase II replacement pack. The voltage suppressor should

not be removed from 1967 - 1968 100 HP models engines which have the

original pulse pack.
EVINRUDE MOTORS
Service Department