
We have had many inquiries from dealers regarding the effect on warranty by the installation of "Kill Switches," "Safety Switches" etc. into the ignition wiring circuit.
The installation of such a switch which would shut off the ignition circuit if the operator were thrown overboard or in some other manner lost control of the boat by being unexpectedly thrown from the helm position does not void the motor warranty.
It must be pointed out that many such switches which are presently available to marine dealers were not originally designed for marine use and are subject to corrosion which could seriously effect not only their intended function but also the performance of the engine.
Some switches which we have examined could, under certain circumstances of corrosion, create sufficient resistance which would reduce materially the required available voltage in the ignition circuit. This will manifest itself in hard starting, poor idling and/or erratic performance of the engine.
It is strongly recommended that before any diagnosis of an ignition problem is attempted, the wiring be checked to determine if an ignition cut-off switch has been installed. By-passing the switch and checking the engine with the switch out of the circuit should be the first step in diagnosing suspected ignition problems.
Service Department