Back to 1970s OMC bulletins

Evinrude Ignition Bulletin #1066 - 1970-1975 Spark Plug and Timing Specifications

January 1975 factory reference listing Champion and AC spark plugs, spark plug gaps, breaker point gaps and ignition timing for 1970 through 1975 Evinrude outboard models.

Evinrude Service Bulletin letterhead
IGNITION #1066
January, 1975
SPARK PLUG AND IGNITION INFORMATION FOR ALL
1970 THROUGH 1975 OUTBOARD MODELS
1970 EnginesChampionACSpark plug gapBreaker point gapTiming highLow
1.5 H.P.J4J+M42K+.030.020
4J4J+M42K+.030.020
6J4J+M42K+.030.020
9.5J4JM42K.030.020
18J4JM42K.030.020
20J4JM42K.030.020
25J4JM42K.030.020
33J4JM42K.030.020
40J4JM42K.030.020
60L19V *V40FF●.010alignmarks
85L19V *V40FF●.010""
115L19V *V40FF●■ .028""
1971 EnginesChampionACSpark plug gapBreaker point gapTiming highLow
2 H.P.J6JM44C.030.020
4J6JM44C.030.020
6J6JM44C.030.020
9.5J4JM42K.030.020
18J4JM42K.030.020
20J4JM42K.030.020
25J4JM42K.030.020
40J4JM42K.030.020
50UL77V **●■19° ±1°3°
60L77V *●.01022°2°
85L77V *V40FF●.01028°5°
100L77V *V40FF●.01028°5°
125L77V *V40FF●■ .02826°5°
1972 EnginesChampionACSpark plug gapBreaker point gapTiming highLow
2 H.P.J6JM44C.030.020
4J6JM44C.030.020
6J6JM44C.030.020
9.5J4JM42K.030.020
18J4JM42K.030.020
20J4JM42K.030.020
25J4JM42K.030.020
40J4JM42K.030.020
50UL77V **●■19° ±1°3°
65UL77V **●■22°8°
85L77V *V40FFM●.01028°5°
100L77V *V40FFM●■ .02828°5°
125L77V *V40FFM●■ .02826°5°
1973 EnginesChampionACSpark plug gapBreaker point gapTiming highLow
2 H.P.J6JM44C.030.020
4J6JM44C.030.020
6J6JM44C.030.020
9.5J4JM42K.030.020
18UJ4J.030.020
20UJ4J.030.020
25UJ4J.030.020
40J4JM42K.030.020
50UL77V **●■19° ±1°3°
65UL77V **●■22°8°
85UL77V **●■28°5°
115UL77V **●■26°5°
135UL77V **●■22°5°
1974 EnginesChampionACSpark plug gapBreaker point gapTiming highLow
2 H.P.J6JM44C.030.020
4J6JM44C.030.020
6J6JM44C.030.020
9.9UL4J ▲.030.020
15UL4J ▲.030.020
25UL4J ▲.030.020
40UL4J.030.020
50UL77V **●■19° ±1°3°
70UL77V **●■20°TDC
85UL77V **●■28°4°
115UL77V **●■26°4°
135UL77V **●■22°4°
1975 EnginesChampionACSpark plug gapBreaker point gapTiming highLow
2 H.P.J6JM44C.030.020
4J6JM44C.030.020
6J6JM44C.030.020
9.9L7J.030.020
15L7J.030.020
25J4JM42K.030.020
40L4J.030.020
50L77J4M40FFX.040■19° ±1°3°
70L77J4M40FFX.040■17°TDC
75L77J4M40FFX.040■16°TDC
85L77J4M40FFX.040■26°4°
115L77J4M40FFX.040■24°4°
135UL77V●■20°4°

■ UJ4J for special applications use J4J
● Plugs are surface gap and do not require adjustment
■ Distributor Sensor gap
▬ Sensor gap is fixed
* L19V and L77V: replaced by L76V
** UL77V: for special applications use L77J4 or AC M40FFX
*** Read Service Bulletin Powerhead #1047 (Piston Failures)
+ J4J and M42K: In cases of wet fouling - sustained low speed operation use J6J or M44C
▲ In cases of wet fouling - sustained low speed operation use L7J

Note: L77J - L2G replaced by L77J4 gapped at .040
V40FFM replaced by M40FFX gapped at .040

SPECIAL APPLICATIONS

Select propeller to turn in top 500 RPM of recommended operating range at full throttle with normal load in boat.
Primarily used in cases of wet fouling, low RPM use.

EVINRUDE MOTORS
Service Department