Back to 1970s OMC bulletins

Evinrude Service Bulletin 1158 - V-6 Fuel Pump Hose

July 1977 fuel system bulletin identifying a potential kink in the fuel pump hose on 1977 175 and 200 HP V-6 motors and specifying molded replacement hose P/N 323401.

FUEL SYSTEM #1158
July, 1977

SUBJECT:   V-6 LOWER-TO-UPPER FUEL PUMP HOSE

There have been a few reports from the field that some 1977 175 and 200 H.P. motors are experiencing a lean condition at high throttle settings.

The probable cause has been the kinking of the upper-to-lower fuel pump hose, #320572, see figure.

V-6 fuel pump hose diagram identifying molded hose 323401, formerly 320572

A new molded hose, #323401, is currently used in production and is available for service.

We recommend you check all V-6's brought in for service and in stock. If the hose is kinked, the new molded hose, #323401 should be installed at once.

Failure to replace a kinked hose could result in a burned piston and other powerhead damage.

EVINRUDE MOTORS
Service Department