← Back to 1970-1980 OMC service bulletins

Evinrude Fuel System Bulletin #1172 - Carburetor Jet Sizes

Issued January 1978, this Evinrude service bulletin catalogs high-speed and idle carburetor orifices by identification, diameter, and factory part number, including 9.9 and 15 H.P. models. The factory cautions that drilling an orifice to its stamped size will not reproduce its calibrated flow.

Evinrude Service Bulletin factory letterhead
FUEL SYSTEM #1172
January, 1978
SUBJECT:   CARBURETOR JET SIZES

Occasionally it is desirable to rejet a carburetor to improve running characteristics of an engine. This is a situation that occurs quite often at high altitudes.

The following chart lists the available jets by size and part number. The larger the orifice size the richer the jet; the smaller the orifice size the leaner the jet. The “Ident” number is stamped on all orifices.

High Speed Orifices (1/4 x 20 Thread Size)
IdentD Type
(Single Barrel)
SizeIdentC Type
(Dual Carbs)
.03838C323150
42D322249.042
45D323280.04545C322664
49D324020.04949C322221
52D321108.052
53D321297.053
54D321407.05454C317646
55D320921.055
56D318684.056
57D322907.05757C317021
.05858C321731
59D319831.05959C317330
.06060C321449
61D319907.06161C320661
.06262C317607
.06363C321559
.06464C324776
.06565C322810
67D319534.06767C317183
.06969C319776
.07070C322996
.07272C317488
.07676C320502
78D319002.078
9.9 & 15 HP Orifice (5/16 x 24 Thread Size)
SizePart Number
.038322752
.040321742
.051319016
.054322293
.058320820
.060319781
Idle Orifice (8–32) Thread Size
SizePart Number
.020324005
.025323003
.026324652
.027317474
.028329936
.029322776
.030317473
SizePart Number
.031318823
.032320016
.033320015
.035318832
.038323149
.045323151
Carburetor orifice diameters are not always equal to their marked size due to effects of entrance and exit angles on orifice flow. The identification number is only an indication of the size relationship of one orifice to another. Therefore, drilling an orifice to the size denoted by its identification number not not provide the same flow as a factory made jet with the same identification number.
EVINRUDE MOTORS
Service Department