
SUBJECT: 1978 150 H.P. HIGH SPEED ORIFICES
(Refer to Fuel System Bulletin #1186)
First production carburetors on the 1978 150 H.P. models used high speed orifices (50c), P/N 324906. A running change was made to (51c), P/N 323938 high speed orifices. This change was made to improve engine durability and performance.
It is very important that the 50c orifices in the early series engines be changed to the 51c orifices particularly when a surging condition or loss of power is noted.
To determine what high speed orifice is in a particular engine, it will be necessary to remove one of the orifices and check the number on the orifice.
If you encounter engines that require the 51c orifices, you must contact the Evinrude Service Department and supply the model and serial number of the engine involved. The necessary orifices will then be forwarded to you for installation.
We will allow .5 hr. time for changing of the orifices.
Service Department